
- 比利時StuvEX防爆與防火設備
- 美國RCS腐蝕產品監測設備
- 盧森堡ROTAREX羅達萊克斯滅火系...
- 意大利GM SISTEMI火花探測及...
- 西班牙ADIX安迪克斯抑制爆炸系統
- 備盈倍BS&B防爆**系統
- 賀爾碧格Newson Gale防爆靜...
- 賀爾碧格hoerbiger防爆**系...
- 意大利Aircom愛科粉塵防爆設備
- 法國Stif斯緹福粉塵防爆設備
- 西班牙Adix安迪克斯隔爆閥抑制系統...
- 瑞士Rico瑞科爆炸隔離閥
- 意大利Control logic康洛...
- 意大利Control logic康洛...
- 意大利科恩除塵和防爆產品
- 美國Argus火花和金屬探測以及回收...
- 美國Edwards愛德華消防報警系統
- 美國Kidde凱德廚房滅火和空氣采樣...
- 美國Marioff HI-FOG高壓...
- 挪威納斯克激光氣體分析儀
- 德國Rembe認必泄壓爆破片及隔離塵...
- 英國Amal阻火器
- 英國Marvac呼吸閥和緊急泄放閥以...
- 英國Marston防爆板和爆破片
- 美國ZOOK防爆板
- 瑞士Rico-Ventex隔爆閥
- 德國GreCon格雷康火花探測器以及...
- 德國Eltex埃爾特克斯防爆靜電接地...
- 美國迪康氣體檢測設備
- 美國PAC實驗室和在線分析儀器
- 奧德姆/安姆特儀器產品
- 美盛環境監測行業成套系統工程
- 美盛流體污染控制,過濾,分離凈化產品
- 美國Norman不銹鋼高壓過濾器
- 美國施羅德過濾器以及過濾系統
- 韓國杜科給水設備以及泵系統
- 美國Cameron卡麥龍過程控制和閥...
- 美國BARTON測量儀器儀表
- 美國NUFLO儀表產品
- 美國clif mock采樣設備和系統
- Caldon超聲波技術產品
- 美國Cameron/Barton卡麥...
- 美國Pentail濱特爾油液凈化設備...
- 韓國雷尊泰克REZONTECH火焰探...
- 韓國CSA Bestouch火焰探測...
- 科馬特泰克色譜技術產品
- 英國愛丁堡Edinburgh ins...
- 歐美Cerex/AquaRead等進...
- 歐文凱利自控閥設備
- 德爾格Draeger**檢測設備
- 美國Det-tronics火焰探測器...
- 泵閥控制
- 美國Honeywell生命**產品
- 密析爾濕度和露點儀表
- 美國TIF公司鹵素檢漏儀
- 美國Teledyne Analyti...
- 美國泰科SCOTT健康和**
- 日本日置HIOKI電測產品
- 英國梅克羅尼(MICRONICS)超...
- 美國AII氧分析儀
產品詳情
簡單介紹:
氫氣發生器
1,代替了代價高昂的危險氣瓶
2,顯著地節省氣瓶
3,安裝簡單,無特殊要求
4,復雜的控制和**系統
5,具有自動轉換開關
6,滿足所有的標準和法規
詳情介紹:
氫氣發生器
1,代替了代價高昂的危險氣瓶
2,顯著地節省氣瓶
3,安裝簡單,無特殊要求
4,復雜的控制和**系統
5,具有自動轉換開關
6,滿足所有的標準和法規
1,代替了代價高昂的危險氣瓶
2,顯著地節省氣瓶
3,安裝簡單,無特殊要求
4,復雜的控制和**系統
5,具有自動轉換開關
6,滿足所有的標準和法規
Hydrogen-Generators
Hydrogen generating in ultra high purity The HG series hydrogen generator produces pure hydrogen (and oxygen as a byproduct) by the electrolysis of water. The hydrogen (uhp quality 99,99999%) output flow is dependand on the model purchased, and it will generate the exact amount of hydrogen flow at a preset pressure (0…4 barg) as required by the attached application. Technical Details The key element of the generator is an electrochemical cell assembly which contains a solid polymer electrolyte. The solid electrolyte material is in the form of a sheet of plastic. There are no free acids or alkalines used. Deionized, destilled water is the only liquid contained in the unit; this must be periodically replenished as it is consumed. The generated hydrogen gas is accumulated in the hydrogen/water reservoir and the desiccant housing. The pressure is controlled through the use of a pressure transducer and adjusted at the front of the unit by service menu. The LC-display indicates the output pressure, and the hydrogen flow. The gas is dried by passing it through a drying nafion-tube and a desiccant tower. The water flows from the internal water tanks to the electrochemical cell assembly. Inside the cell assembly, electrolysis occurs, and positively charged hydrogen ions are transported across the solid polymer electrolyte along with excess water molecules. Negatively charged oxygen ions recombine to form molecular oxygen. The oxygen saturated water is fed into a water/oxygen separator vent, where the water is returned to the water tank, and the oxygen is vented to the atmosphere. The positively charged hydrogen ions recombine to form molecular hydrogen. The generated hydrogen is made available at the output port of the system. Residual hydrogen is vented to the atmosphere, and excess water is returned to the water tank. The quantity of hydrogen generated is directly proportional to the flow of current across the cell module. This current is carefully modulated by the electronic control circuitry that is an important part of the generator. The electrical power supplied to the cell is regulated to provide just enough power to create the required flow rate of hydrogen. The hydrogen generators can be installed in the laboratory and do not classify the surrounding area as dangerous. Technical data
H2 Generator Models for large volume of H2
All Hydrogen Generators in 19"-housing available. |
![]() Shipping weights
Sizes of housings
Options
The primary routine maintenance required for the hydrogen generators are
Water consumption It is possible to produce 1,2 m³ hydrogen out of 1 ltr. deionized water (55,6 mol H2O). To supply a GC-FID a volume of 30…40ml/min. of carrier gas is needed. The supply of 6 FID's with 2 ltrs. of water is for one week by 24-hours-working possible. |
![]() |
Download Specification |